Atomic-6 tests new space Armor® technology to protect astronauts from 16,000mph space debris


Atomic-6 has announced results from a proof-of-concept experiment exploring whether its Space Armor® satellite debris shielding could help protect astronauts during spacewalks. In testing at Texas A&M University’s Hypervelocity Impact Laboratory, a ballistic torso behind a Space Armor® Lite tile showed no visible damage or penetration following an impact at approximately 16,100 miles per hour. A comparison test using a solid aluminum plate, which simulates the protective technology used in current spacesuits, left fragments embedded in the torso.
The experiment evaluated both the shielding material and what reached the simulated body behind it, an important consideration for potential protection against micrometeoroids and orbital debris (MMOD).
Comparing Protection Under Matching Test Conditions
Both configurations faced a 3-millimeter-diameter aluminum sphere traveling at approximately 7.2 kilometers per second, or about 16,100 miles per hour.
Atomic-6 mounted a hexagonal composite tile in front of a transparent ballistic torso containing simulated soft tissue and skeletal structures, supplied by Georgia-based Ballistic Dummy Lab.
For the comparison, testers substituted a 4-millimeter-thick solid aluminum plate, keeping the impact angle, shield-to-torso spacing, and mounting arrangement identical. Atomic-6 selected that thickness using NASA ballistic-limit equations, which engineers use to estimate whether a shield will be penetrated by a projectile of a given size and speed.
Inspection after the composite test found no visible marks or penetration in the torso and no visible bulging, cracking or material leaving the tile’s rear surface. In the aluminum test, fragments became embedded in the simulated torso.
The comparison addressed a hazard known as rear-face spalling, in which an impact causes material to break away from the back of a shield and travel toward the person or equipment behind it. The aluminum test produced the type of secondary fragmentation Atomic-6 sought to evaluate against its composite material.
The aluminum control was a single solid plate, not a traditional Whipple shield, which uses separated bumper and rear-wall layers to disperse an incoming particle. The experiment did not compare complete spacesuits.
Exploring a Potential Spacesuit Application
Atomic-6 developed Space Armor® tiles as modular shielding for satellites. The Space Armor® Lite tile used in the experiment had a mass of 14 kilograms per square meter.
The experiment used a stationary ballistic torso, with no functioning spacesuit, pressure garment or life-support hardware. Its findings describe visible damage under the tested conditions; they do not establish injury outcomes, pressure retention, or readiness for use in space.
“Astronauts face extraordinary risks every time they venture into space, and the last thing they need is an unknown threat from debris traveling thousands of miles per hour,” said Trevor Smith, CEO, Atomic-6. “We created Space Armor® to protect spacecraft, but protecting the people who risk their lives aboard them is an even greater mission. These early results give us a compelling reason to explore how we could make spacewalks safer, and there's nothing more important than helping to bring our astronauts home safely.”
Atomic-6 plans additional tests involving curved shielding and different impact angles to more closely approximate the geometry of a chest or shoulder. Any future spacesuit application would also require evaluation of attachment points, mobility, pressure retention and performance in the thermal-vacuum environment.
The testing follows Space Armor® technology’s first launch last month aboard Portal Space Systems’ Starburst-1 spacecraft, carried by a SpaceX Falcon 9 rocket on the Bandwagon-5 rideshare mission.
The flight demonstration marks a milestone for the satellite shielding technology as Atomic-6 explores its potential to protect astronauts.


